CHECKLIST COMPASS
Operational Status - HCI, top of radome
VCP - HCI, found in elevation slices coming from radome
RDA Control - HCI, click the RDA Control. Found in display
Auto PRF - HCI, found near bottom right
Archive II - HCI, found below the RDA
RDA Aux Power - HCI, click the RDA Control, found in display
RDA State - HCI, found above RPG or in the RDA Control menu
RDA Alarms - HCI, found to the left of the radome
Data Enable - HCI, Black squares moving in the Green lines running from the RDA to the RPG indicate data flow. ***At 0.5 / 1.5 degrees, R and V/W are done individually. At and above 2.5, the square run simultaneously.
Calibration - HCI, near bottom right
***The following 3 are found under RDA Performance***
Generator Fuel Level - HCI, menu on right side, click RDA Performance. From that menu, Click Tower Utility. Found in display.
Transmitter Peak Power - HCI, menu on right side, RDA Performance. From that menu,
Click Transmitter. Found in display.
Linear Channel Power - HCI, menu on right side, click RDA Performance. From that menu, click Calibration Check. Found in display.
Maintenance Required/Mandatory, Load Shed - HCI. Click RPG Status
Archive III - HCI, Bottom of RPG, click Archive Products to determine what is being archived
Time - Found ontop of HCI screen.
Line Status - HCI, click green line running from the RPG to the USERS block
Nominal Clutter Area - HCI, near the bottom right. Click the feedback (color coded) next to Precip Catagory. In the open menu, click Modify Parameters. Found in database.