Skip Navigation Linksweather.gov
NOAA logo - Click to go to the NOAA homepage National Weather Service   NWS logo - Click to go to the NWS homepage
Lower Mississippi River Forecast Center
Local forecast by
"City, St" or zip code
  
Rivers & Hydrology
Precip & Weather
Climate & History
Additional Info
About The LMRFC
Home : River Forecasts : Tributary Forecasts : French Broad and West NC Basins
Swannanoa River at Biltmore

The latest stage is 1.3ft - 0100A CDT 10/16 
This forecast was created on Oct 15 at 8:04 AM CDT.

 
:BILTMORE - Swannanoa River   (1976.58+Forecast Stage=Height in FT,NGVD29)
:FLOOD STAGE 12.0    
:
:LATEST STAGE 1.3 FT AT 0700 CDT ON 1015
.ER BLTN7    20081015 C DC200810150804/DH13/HGIFF/DIH6
:QPF FCST        7AM       1PM       7PM       1AM
.E1 :1015:          /      1.3/      1.3/      1.3
.E2 :1016:/      1.3/      1.3/      1.3/      1.3
.E3 :1017:/      1.3/      1.3/      1.3/      1.3
.E4 :1018:/      1.3/      1.3/      1.3/      1.3
.E5 :1019:/      1.3/      1.3/      1.3/      1.3
.E6 :1020:/      1.3
.ER BLTN7    1015 DC200810150804/DH18/PPQFZ/DIH6/0.00/0.00/0.00/0.00/

Disclaimer : Forecasts for this location are prepared by the Lower Mississippi River Forecast Center and should not be used for official purposes. The official forecast for this location is issued to the general public by the Greenville/Spartanburg, SC Weather Forecast Office.
For more information, please read The Official National Weather Service's Disclaimer

Additional Site Information
This site is operated by the U.S. Geological Survey, Asheville (NC) District in coperation with the North Carolina Department of Environment and Natural Resources.
  Real-Time information from the USGS
  Historical information from the USGS

Key to Reading Forecast
  Flood Stage:Stage where structures or roadways begin to be effected
  Latest Stage:Gage height and time of latest observed stage when forecast was created
  QPF Forecast:Date of forecast is to the left (0815 = August 15th) and time is in the column above the forecast.
  .ER Lines:SHEF code used for internal purposes